5.3 Logging in: Regular User Mode
228
For users registered in a local account
Specify a user name from the user information of the local account.
Authentication is performed with a specified user login name for a local account saved
in a scanner.
Note that the authenticated user information is also used when saving scans to a network
folder.
When the scanner is turned on or restarted, automatic login without displaying the [Login]
window is possible.
Login is not possible if the Active Directory account option is "User must change
password at next logon". Contact an administrator to change a password, and then try
logging in.
1. Press the power button.
The [Login] window appears.
HINT
When using a scanner without using an LDAP server or registering a local account, enter the
following user name and password. For details about the LDAP server, refer to "LDAP
Server" (page 45).
User name: guest
Password: guest
However, this cannot be used if login with the guest account is disabled.
For details about automatic login or enabling login with the guest account, refer to "4.6.1
Setting the Login Settings" (page 92).
Only one administrator or regular user can log in to the scanner at a time. Multiple persons
cannot log in at the same time.
When [Other LDAP Server] is selected for [Server Type], you cannot skip entering a
password in the [Login] window. Always enter the password.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
