Fujitsu N7100

5.4 Sending the Scanned Data by e-Mail
240
 For distribution lists
On the [Distribution List] tab, enter the list name and e-mail addresses to be added
to the distribution list.
For details about e-mail address settings values, refer to "B.1 e-Mail Address
Setting Values" (page 408).
6. Press the [OK] button.
 The e-mail addresses and distribution lists are added to your My List.
HINT
e-Mail addresses can be selected from the e-mail address book, which can be accessed
by pressing . For details, refer to "5.4.1 Selecting an e-Mail Target from the e-Mail
Address Book" (page 233).
If the e-mail address book cannot be used, contact the administrator.
HINT
My List can also be edited using User Editor. For details, refer to "Appendix F Editing Using
User Editor" (page 433).