5.7 Saving the Scanned Data to a Network Folder
263
3. Select a folder for saving the scanned data.
4. Press the [OK] button.
This returns you to the [Save] window.
5. In the [Save as] field, enter a file name for the scanned data to be saved.
6. Select whether or not to overwrite an existing file with the same name.
Whether or not the file was successfully saved can be checked in the user log.
For more details about accessing the user log, refer to "5.12.1 Viewing Details on
Send Operations That Were Completed (User Log)" (page 326).
HINT
You can select a folder from the list of folders that are added by the administrator in
advance. To change the folders in the list, contact the administrator.
For more details about adding network folders, refer to "4.13.1 Setting the Network
Folders" (page 131).
For more details about adding FTP server folders, refer to "4.13.2 Setting the FTP
Server Folders" (page 137).
HINT
If the [File Server Authentication] window appears, enter authentication information
needed to access the file server and press the [OK] button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
