5.14 Processing a Job
339
ATTENTION
When printing a patch code sheet, pay attention to the following:
Use blank white paper.
Print it at 100%. If you print it in a reduced size, the printed sheet is not recognized
correctly.
Do not use the toner saving function. When the printing is light, it is not recognized
correctly.
Do not use thin paper. When bleed-through occurs, the printed sheet is recognized as a
sheet that is printed on both sides.
When you copy the printed patch code sheet with a copier, configure the copying setting so
that the copied sheet has the same size and printing density.
Using the same patch code sheet repeatedly may decrease the recognition accuracy due to
accumulated dirt on the sheet. If the sheet is not recognized correctly or gets smudged, print
a new patch code sheet and use it.
To Next Page
Loading...
