1.3 User Types and Operations
34
Yes: Available —: Not available
Maintenance
System Update
(P.175) (P.177) — — Yes (*11) Yes Yes (*12)
Add-in Software
(P.179) — — Yes (*11) Yes Yes
(*12)(*13)
Technical Support
(P.182) (P.183) — — Yes (*11) Yes —
Alert Notification
(P.184) — — Yes Yes Yes
Device Test
Calibrate Screen
(P.365) —YesYes— —
Scan Test
(P.362) —YesYes— —
Job Menu Settings
Job Sequences
(P.192) ———YesYes
Job Menus
(P.202) ———YesYes
Job Groups
(P.207) ———YesYes
Item
Touch panel
Admin
Tool
Central
Admin
Console
Wizard
Basic
mode
Advanced
mode
(*1): For the operations, refer to the Scanner Central Admin User's Guide.
(*2): The [Date / Time] input field and [Get Time] button cannot be used.
(*3): Certificates cannot be imported.
(*4): Synchronization not possible.
(*5): If you set [IPv6 Function] to [On] on the window that is displayed when
[Network Advanced Settings] under [Network Settings] is selected, the menu
that is displayed on the window is switched to the menu that supports the
enabled IPv6 function.
(*6): Contents of the SSL Certificate are not shown.
(*7): [Address] and [Port Number] cannot be set.
(*8): Printers, folders and SharePoint folders that can be accessed from the Central
Admin Server can be set.
(*9): This can be viewed on the Central Admin Console [Scanner Details] window.
This cannot be viewed on the scanner settings edit window, which is displayed
by pressing the [Edit Scanner Settings] button in the Central Admin Console
[Scanner Settings] window.
(*10): When using the touch panel, only the following operations can be performed:
Clearing the user data store, system settings reset, and secure initialize
To Next Page
Loading...
Need help?
General
Weight and Dimensions
