EasyManuals Logo

Fujitsu N7100 User Manual

Fujitsu N7100
487 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
2.2 Using the Scanner Buttons
54
(*2): When the scanner power button is pressed while a window displaying the
[Shutdown] button is shown, the "Please release the power button and select
shutdown to turn the scanner off." message appears.
When the scanner power button is pressed while a window not displaying the
[Shutdown] button is shown, the "Please release the power button. Can not
shutdown scanner because the system is in operation." message appears.
(*3): If [Turn off the display only] is set for [Standby Mode] on the administrator
window, only the display turns off. The power button stays lit up.
ATTENTION
When the scanner is running or in standby mode, do not hold down the power button for 4
seconds or longer, as it may cause the scanner to shutdown. If this happens, saved scanned
data may become unusable.
If you hold down the power button for 4 seconds or longer and the scanner is shutdown,
remove the AC cable to ensure that the power is completely off.
After turning the power off, wait for at least 10 seconds before turning the power back on
again. To shutdown the scanner correctly, press the [Shutdown] button on the window.
HINT
If the scanner is left in standby mode until the time set for [Power-off after], the power of the
scanner is automatically turned off. Note that if this occurs, it takes time to turn the scanner
on again.
The time to enter standby mode and to power off the scanner can be changed. For details,
refer to "4.6.3 Setting the Standby Mode" (page 97).
Automatic login without displaying the [Login] window is possible. For details about how to
set automatic login, refer to "4.6.1 Setting the Login Settings" (page 92).
If automatic login is set, login via the Admin Tool is possible while the main menu or job menu
is displayed.

Table of Contents

Other manuals for Fujitsu N7100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu N7100 and is the answer not in the manual?

Fujitsu N7100 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 3048 mm
Output color depth24 bit
ADF scan speed (b/w, A4)25 ppm
Optical scanning resolution600 x 600 DPI
Duplex ADF scan speed (b/w, A4)50 ipm
Black/white scanning color modesGrayscale, Monochrome
DisplayLCD
Scanner typeADF scanner
Product colorBlack
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, E-mail Server, Fax, File, FTP
Sensor typeCIS
Scan file formatsJPG, PDF, TIFF
Daily duty cycle (max)400 pages
Supported network protocolsTCP/IP(IPv4 / IPv6), DNS, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP, SNMP
Auto document feeder (ADF) input capacity50 sheets
Maximum scan area (ADF)216 x 355.6 mm
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A8
ISO B-series sizes (B0...B9)B5, B6
Scanning media types supportedBusiness Card, Plain paper, Plastic Card, Post Card(JPN), Thick paper, Thin paper
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight40 - 209 g/m²
USB version2.0
Standard interfacesEthernet, USB 1.1, USB 2.0
Input voltage100-240 V
Power supply typeAC
AC input frequency50 - 60 Hz
Power consumption (standby)1 W
Power consumption (typical)38 W
Power consumption (PowerSave)2 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesRoHS, ENERGY STAR
Bundled softwareScanner Central Admin Server
Ethernet LAN data rates10, 100, 1000 Mbit/s
Weight and Dimensions IconWeight and Dimensions
Depth232 mm
Width300 mm
Height172 mm
Weight6000 g

Related product manuals