Fujitsu N7100 - Page 65

3.3 Installing the Admin Tool
65
ATTENTION
 From the [Tools] menu in Internet Explorer, select [Internet Options], and note the following
points below about the settings shown in the [Internet Options] dialog box.
 In the [Accessibility] dialog box shown when the [Accessibility] button is pressed on the
[General] tab, do not change the formatting and user style sheet settings. If these
settings are changed, the displayed style of the Admin Tool may be corrupted.
 In the [Language Preference] dialog box shown when the [Languages] button is pressed
on the [General] tab, move the same language as for the scanner to the top. If a different
language is specified, a problem may occur with the input or displays for Admin Tool.
 On the [Security] tab, if [Security level for this zone] is set to [High], part of the Admin
Tool window may not be correctly displayed.
In this case, on the [Security] tab, add the scanner to the trusted site zone and press the
[Default Level] button. Or press the [Custom Level] button and set [Binary and script
behaviors] to [Enable].
 When the font size is large, part of the dialog box may not be shown correctly. In this case,
use a smaller font size.