Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

RX900 S2 Upgrade and Maintenance Manual
Contents
8.5.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 133
8.5.3 Deactivating the expansion card . . . . . . . . . . . . . . . . . 133
8.5.4 Pulling the expansion card out of the slot . . . . . . . . . . . . 134
8.5.5 Removing the expansion card from the removal tool . . . . . . 135
8.5.6 Removing the engaging hooks . . . . . . . . . . . . . . . . . 136
8.5.7 Inserting a retaining plate in the removal tool . . . . . . . . . . 137
8.5.8 Inserting the dummy module in the slot . . . . . . . . . . . . . 138
8.5.9 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 138
8.6 Replacing a hot-plug expansion card . . . . . . . . . . . . . 139
8.6.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 139
8.6.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 140
8.6.3 Deactivating the expansion card . . . . . . . . . . . . . . . . . 140
8.6.4 Pulling the expansion card out of the slot . . . . . . . . . . . . 141
8.6.5 Removing the expansion card from the removal tool . . . . . . 142
8.6.6 Removing the engaging hooks . . . . . . . . . . . . . . . . . 143
8.6.7 Inserting an expansion card in the removal tool . . . . . . . . . 143
8.6.8 Inserting the expansion card in the slot . . . . . . . . . . . . . 146
8.6.9 Activating the expansion card . . . . . . . . . . . . . . . . . . 147
8.6.10 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 147
8.7 Installing a non-hot-plug expansion card . . . . . . . . . . . 148
8.7.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 148
8.7.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 149
8.7.3 Removing the PCI Riser (if applicable) . . . . . . . . . . . . . 149
8.7.4 Removing the slot cover . . . . . . . . . . . . . . . . . . . . . 150
8.7.5 Inserting the expansion card in the slot . . . . . . . . . . . . . 150
8.7.6 Installing the PCI Riser (if applicable) . . . . . . . . . . . . . . 151
8.7.7 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 152
8.8 Removing a non-hot-plug expansion card . . . . . . . . . . 152
8.8.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 153
8.8.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 153
8.8.3 Removing the PCI Riser (if applicable) . . . . . . . . . . . . . 154
8.8.4 Removing the expansion card from the slot . . . . . . . . . . . 155
8.8.5 Installing the slot cover . . . . . . . . . . . . . . . . . . . . . 156
8.8.6 Installing the PCI Riser (if applicable) . . . . . . . . . . . . . . 157
8.8.7 Completing the task . . . . . . . . . . . . . . . . . . . . . . . 157
8.9 Replacing a non-hot-plug expansion card . . . . . . . . . . 158
8.9.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 158
8.9.2 Starting the task . . . . . . . . . . . . . . . . . . . . . . . . . 159
8.9.3 Removing the PCI Riser (if applicable) . . . . . . . . . . . . . 160
8.9.4 Removing the expansion card from the slot . . . . . . . . . . . 161

Fujitsu PRIMERGY RX900 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX900 S2
Category	Server
Language	English