GE LOGIQ P9 Service Manual

GERAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
3-32 Section 3-8 - Printer Installation
Section 3-8
Printer Installation
NOTE: For Connection schemes refer to Section 3-6 "Connection of Auxiliary Devices" on page 3-11.
For further installation instructions see:
• Section 3-8-1 "Installing Digital Black & White Printer Sony UP-D898" on page 3-32
• Section 3-8-2 "Installing Digital Color Printer Sony UP-D25MD" on page 3-27
• Section 3-8-5 "Adjustment of Printer Settings" on page 3-37
3-8-1 Installing Digital Black & White Printer Sony UP-D898
1) Power off/Shutdown the system as described in: Section 3-7-3 on page 3-25.
2) Physically connect the printer cables as described on Section 3-6-2 on page 3-13.
NOTICE
!! NOTICE:
After boot up of the system, verify the correct settings in the printer “Properties”,
see: Section 3-8-4 "Adding Printer to the system" for assigning the Printer to the remote keys P1
, P2,
P3
, P4, P5 and/or P6, and
see: Section 3-8-5 "Adjustment of Printer Settings" .

GE LOGIQ P9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Elastography	Yes
Connectivity	DICOM, USB, Ethernet, HDMI
Doppler Modes	Color Doppler, Power Doppler
Probes	convex, linear, phased array
Imaging Modes	M-Mode, Color Doppler, Power Doppler
Portability	Cart-based
Applications	Vascular, Cardiac, OB/GYN, Musculoskeletal
Weight	Approx. 80 kg
Touch Panel	10.1-in touchscreen