GEDRAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
Chapter 4 - Functional Checks 4-1
Chapter 4
Functional Checks
Section 4-1
Overview
4-1-1 Purpose of Chapter 4
This chapter provides procedures for quickly checking major functions of the LOGIQ P9/P7 scanner
diagnostics by using the built-in service software, and power supply adjustments.
Section 4-2
Required Equipment
• An empty (blank) CD-R, DVD-R, and/or external USB devices (stick or hard disk drive for data
storage/backup. A DVD+RW disc for DVR recording
Table 4-1 Contents in Chapter 4
Section Description Page Number
4-1
Overview
4-1
4-1-1
Purpose of Chapter 4
4-1
4-2
Required Equipment
4-1
4-3
General Procedure
4-3
4-3-1
System Exterior Visual Check
4-4
4-3-2
Mechanical Parts Functional Check
4-7
4-3-3
Power On/Off
4-13
4-3-4
System Information
4-18
4-3-5
System Integration Checks
4-21
4-3-6
Peripheral Checks
4-23
4-3-7
Mode Transition Checks
4-24
4-3-8
OPIO Interface Check (R1, R2, R2.5 only)
4-33
4-3-9
OPIO Interface Check (R3 only)
4-36
4-3-10
Touch Panel Calibration (R3 only)
4-39
4-4
Board Diagnostics
4-42
!! NOTICE:
Most of the information pertaining to this Functional Checks chapter is found in the LOGIQ P9/P7 Basic
User Manual;
To Next Page
Loading...
Need help?
General
