GERAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
3-58 Section 3-13 - Configuring Connectivity
Section 3-13
Configuring Connectivity
3-13-1 Overview
You use Connectivity functionality to set up the connection and communication protocols for the
ultrasound system. This page gives an overview of each of the Connectivity functions. Each function is
described in detail in the following pages.
3-13-2 Structured Reporting
DICOM Structured Reporting provides the results of a procedure as structured data elements (well-
defined fields) as opposed to unstructured data (large amounts of text undifferentiated by individual
fields). This greatly improves query capability. DICOM Structured Reporting creates coded clinical data
that can be used for clinical research, outcomes analysis, and disease management.
DICOM Structured Reporting is a standardized format for medical results. LOGIQ P9/P7 supports the
following templates:
• OB-GYN REPORT TEMPLATES
• VASCULAR ULTRASOUND REPORT TEMPLATES
• The system supports selectable vessels with their locations for B-Mode measurements.
• For Vascular studies (Bypass Graft, UEV Map, LEV Map, LEA/UEA, and Carotid), additional
measurement locations were added. For instance, for a Bypass Graft, there are now
measurements at Inflow, Anast, Thigh, Knee, Calf, Ankle, Graft, RunOff, Pre-Sent, Stent, Post-
Stent, and Outflow locations.
• ECHOCARDIOGRAPHY PROCEDURE REPORT TEMPLATES
These templates do not support all M&A results for the LOGIQ P9/P7.
3-13-2-1 Supported parameters
The DICOM supported parameters are listed in the DICOM Conformance Statement at the following
web site under DICOM - Ultrasound:
http://www3.gehealthcare.com/en/Products/Interoperability/DICOM
To Next Page
Loading...
Need help?
General
