GE LOGIQ P9 Service Manual

GEDRAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
Chapter 4 - Functional Checks 4-42
Section 4-4
Board Diagnostics
NOTICE
!! NOTICE:
Please see Section 7-6 for the details.
Category Item MCB MDC MPI MIO
Battery
Module
ECG DC4D Other
MCB
MCB Swept Demodulator Test X
MCB Front End Interface Test X
MCB Analog Test X
MCB Memory Access Test X
MCB Front End Interface FPGA Test X
DSP Master Clock Check X
MCB Temperature Test X
CPU Temperature Test X
MCB Voltage Test X
FPGA Version Test X
HV_STOP Test X X
MDC
MDC Temperature Test X
MDC Voltage Test X
Battery
Battery Status Test X
Battery Charge/ Discharge Test X
System
Rack Temperature Test X X X
Rack Voltage Test X X X
Memory Callisto Internal Memory Test X
Digital Receive
AFE IF Test X
Complex Mixer Test X
CE Decoder Test X
Analog Receive
Noise Floor Test X
BF Analog Rx Gain Test (High Gain) X
BF Analog Rx Gain Test (Med Gain) X
BF Analog Rx Gain Test (Low Gain) X
aCW Pedof X
aCW Beamforming X
aCW IQ Symmetry X
ECG ECG Module Test X
DC4D
DC4D Presence Test X
DC4D Version Test X
Static 3D Test X
4D Test X

GE LOGIQ P9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Elastography	Yes
Connectivity	DICOM, USB, Ethernet, HDMI
Doppler Modes	Color Doppler, Power Doppler
Probes	convex, linear, phased array
Imaging Modes	M-Mode, Color Doppler, Power Doppler
Portability	Cart-based
Applications	Vascular, Cardiac, OB/GYN, Musculoskeletal
Weight	Approx. 80 kg
Touch Panel	10.1-in touchscreen