GERAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
3-40 Section 3-8 - Printer Installation
b) Color Correction: set Printer Hardware Color Correction1
c) Lightness: Sharpness = 7; Dark = 0; Gamma = 14; Light = 0
d) Lightness: Gamma Curve = Curve 1
4) For saving the adjusted printer settings click APPLY
and then OK.
Finally close the ‘Printers’-window with the close button and exit System Setup with SAVE&EXIT
.
Figure 3-27 Graphics page (Color Balance + Color Correction)
Figure 3-28 Graphics age (Lightness + Gamma Select)
To Next Page
Loading...
