GE LOGIQ P9 Service Manual

GEDRAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-29
11) A confirmation window appears, and then hit the Enter key.
12) Approx. 40 minutes later, loading the software will be completed.
13) Remove Base System Software DVD, and type "exit" to reboot the system.
14) At the first system reboot after loading the software, the OS will reboot the system automatically.
15) After the reboot, the installation of system (Windows Embedded Standard
will be fully completed.
16) Go to BIOS mode (Refer to the procedure 2) 3) above.)

GE LOGIQ P9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Elastography	Yes
Connectivity	DICOM, USB, Ethernet, HDMI
Doppler Modes	Color Doppler, Power Doppler
Probes	convex, linear, phased array
Imaging Modes	M-Mode, Color Doppler, Power Doppler
Portability	Cart-based
Applications	Vascular, Cardiac, OB/GYN, Musculoskeletal
Weight	Approx. 80 kg
Touch Panel	10.1-in touchscreen