GERAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
3-24 Section 3-7 - Completing the Set Up
5) Startup GE
NOTE: Startup GE Healthcare wallpaper with progress bar may differ depending on product type and release.
6) The software initiates and sets up the Front-End electronics and the rest of the scanner
(incl. the clicking sound of the relays on the PIL board).
7) The Keyboard backlight is lit.
8) As soon as the software has been loaded, the 2D screen is displayed on the monitor.
To Next Page
Loading...
