4 -11
7.
Specify the setting value using the [ ] [ ] icon or the [ ] icon.
•
Number of copies can be set as much as it can fit in the media set on the printer.
•
The initial value for the number of copies is always 1.
Supplement
8.
Confirm the setting and press the [OK].
9.
Press the [COPY SPACE]
Copy interval can be set when MEDIA CHANGE MODE is turned OFF.
Supplement
10.
Specify the setting value using the [ ] [ ] icon or the [ ] icon.
•
You can set the range between 1.0 mm and 10.0 mm.
•
This setting is maintained even if the power is turned off.
Supplement
11.
Confirm the setting and press the [OK].
12.
Press the [START].
13.
Press the [YES].
The copy will start.
•
Cutting data is stored even if the media is exchanged.
•
It can be copied as many times until the buffer memory is cleared.
Supplement
To Next Page
Loading...
