GRAPHTEC CE8000 Series - Page 127

5-18
9. Press the [CORRECTION VALUE X].
10. Specify the setting value using the [ ] [ ] icon or the [ ] icon.
Enter the value of X measured in step 7.
You can set the range between -3.0 mm and +3.0 mm.
Supplement
11. Confirm the setting and press the [OK].
12. Press the [CORRECTION VALUE Y].
13. Specify the setting value using the [ ] [ ] icon or the [ ] icon.
Enter the value of Y measured in step 7.
You can set the range between -3.0 mm and +3.0 mm.
Supplement
14. Confirm the setting and press the [OK].
15. Press the [SAVE].
16. Press the [ ] icon.
It will return to HOME screen.