GRAPHTEC CE8000 Series - Page 14

C-5
Chapter 9: Settings Regarding Interface
9.1 Setting Interface .............................................................. 9-2
USB interface ....................................................................9-2
Wireless LAN, Wired LAN interfaces ..................................................9-2
9.2 Connecting via wireless LAN ................................................. 9-3
Access point setting ...............................................................9-3
Set IP address, subnet mask and gateway ...............................................9-5
DHCP setting ....................................................................9-8
Confirming the connection information .................................................9-10
9.3 Connecting via wired LAN ....................................................9 -11
IP address, subnet mask and gateway settings ...........................................9 -11
DHCP setting ...................................................................9-14
9.4 Clearing buffer memory ......................................................9-16
Chapter 10: Settings Regarding Operation Environment
10.1 Related to Menu Display ..................................................... 10-2
Display language setting (LANGUAGE SELECTION) .......................................10-2
Display Length Unit Setting (LENGTH UNIT) .............................................10-3
10.2 Related to sensor ............................................................ 10-4
Enabling/Disabling the media sensors .................................................10-4
Enabling/Disabling the push roller sensors ..............................................10-5
10.3 Plotter Environment-related Settings .........................................10-7
Fan suction setting ...............................................................10-7
Media set assist settings ...........................................................10-8
Enabling/Disabling the beep setting ...................................................10-9
LCD contrast setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
Chapter 11: Settings of Controls from Computer
11.1 Settings Related to Command Processing ....................................11-2
Setting the command .............................................................11-2
Priority of cut condition selection .....................................................11- 3
11.2 Related to GP-GL command ..................................................11- 4
Setting the GP-GL step size.........................................................11- 4
Enabling/Disabling the ' : ' and ' ; ' commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 5
Moving the pen while raised or lowered in Response to the 'W' command ........................11- 6
11.3 Related to HP-GL command ..................................................11-7
Model ID response ............................................................... 11-7
Circle command resolution .........................................................11- 8
Chapter 12: Data Link
12.1 Select Connection Destination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-2
12.2 Data Link with USB Memory ................................................. 12-3
12.3 Output with a Bar Code ...................................................... 12-5
12.4 Communication Timeout ..................................................... 12-8
12.5 Skew Scanning .............................................................. 12-9