15-14
Error
Displayed
LCD Display Cause Solution
E05022 Media skew is detected. Set the media again.
Increase the skew detection set value.
E05023 Data link server is not activated. Activate data link server.
E07001 Communication with the access point is no
longer possible.
Please check the communication status with
the access point.
E07002 The encryption key of access point is
incorrect.
Please enter the correct encryption key of
access point.
E07003 No access point was found to connect to. Make sure there is an access point nearby
and that the access point is turned on.
E07004 Access point connection failed. Check the operating status of the access
point.
E07005 Communication with the access point has
been disconnected.
Check the operating status of the access
point.
To Next Page
Loading...
