120
3. Click a client name to see its details.
Figure 120 Displaying client statistics
Table 75 Field description
Field Description
MAC address MAC address of the client.
SSID Service set ID (SSID).
QoS Mode
QoS mode, which can be:
• WMM—Indicates that the client is a QoS client.
• None—Indicates that the client is a non-QoS client.
Max SP length
Maximum service period.
AC Access category.
State
APSD attribute of an AC, which can be:
• T—The AC is trigger-enabled.
• D—The AC is delivery-enabled.
• T | D—The AC is both trigger-enabled and delivery-enabled.
• L—The AC is of legacy attributes.
Assoc State
APSD attribute of the four ACs when a client accesses the AP.
Uplink CAC packets Number of uplink CAC packets.
Uplink CAC bytes Number of uplink CAC bytes.
Downlink CAC packets Number of downlink CAC packets.
Downlink CAC bytes Number of downlink CAC bytes.
Downgrade packets Number of downgraded packets.
Downgrade bytes
Number of downgraded bytes.
Discard packets Number of dropped packets.
Discard bytes
Number of dropped bytes.
To Next Page
Loading...
Need help?
General
