253
5. Click Apply.
After you dial number 20001234 at Telephone A, the number matches call route 2002.
Configuring the number selection rule as random selection
Configure Router A:
1. Select Voice Management > Dial Plan > Number Match from the navigation tree to access
the page for configuring the match order of number selection rules.
Figure 637 Match order of number selection rules configuration page
2. Select Random Selection from the First Rule in the Match Order list.
3. Click Apply.
After you dial number 20001234 at Telephone A, the number matches call route 2000, 2001, or 2002
at random.
Configuring entity type selection priority rules
Network diagram
As shown in Figure 638, there are an IP connection and a PRI connection between Router A and
Router B. Configure different entity type selection priority rules for calls from Telephone A to
Telephone B.
Figure 638 Network diagram
Configuring Router A
1. Select Voice Management > Digital Link Management from the navigation tree to access the
digital link list page.
2. Find the digital link VE1 5/0 in the list, click its corresponding icon to access the E1
parameters configuration page.
To Next Page
Loading...
