52
Item Description
MTU Configure the MTU on the interface.
Configuring a CT1/PRI interface
The CT1/PRI interface supports PPP connection mode. For more information about PPP, see
"Configuring an SA interface."
Whe
n
it is operating as a CT1 interface, all the timeslots (numbered 1 to 24) can be randomly divided
into groups. Each of these groups can form one channel set for which the system automatically
creates an interface logically equivalent to a synchronous serial interface. This interface supports
link layer protocols such as PPP, HDLC, FR, LAPB, and X.25, and network protocols such as IP and
IPX.
To configure a CT1/PRI interface:
1. Select Interface Setup > WAN Interface Setup from the navigation tree.
2. Click the icon for the CT1/PRI interface.
3. Configure the CT1/PRI interface, as described in Table 34.
Figure 34
Configuring a CT1/PRI interface
Table 34 Configuration items
Item Description
WAN Interface Displays the name of the CT1/PRI interface to be configured.
To Next Page
Loading...
Need help?
General
