306
Configuring a SIP trunk account
Configuring a SIP trunk account
A SIP trunk account contains information allocated to users by the carrier, including authentication
username, authentication password, host name, host username, and the associated SIP server
group.
Select Voice Management > SIP Trunk Management > Account Management from the
navigation tree, and click Add. The following page appears.
Figure 698 Configuring a SIP trunk account
Table 260 Configuration items
Item Description
Account ID Enter a SIP trunk account ID.
SIP Server Group
for Registration
Select the SIP server group used by the SIP trunk account for registration. SIP server
group can be configured in
Voice Management
>
Call Connection
>
SIP Server
Group Management
.
By default, a SIP trunk account has no SIP server group specified for registration.
Registration
Aging Time
Set the registration aging time. If you do not configure this item, the system uses the
registration aging time configured in
Voice Management
>
Call Connection
>
SIP
Connection
.
Host Username Enter the host username allocated by the ITSP to the SIP trunk account.
Host Name Enter the host name allocated by the ITSP to the SIP trunk account.
Account Status
• Enable.
• Disable.
By default, the SIP trunk account is enabled.
Disabling a SIP trunk account that is already involved in a connection does not delete
the connection. In other words, the disable configuration takes effect to the next call that
uses this account.
To Next Page
Loading...
Need help?
General
