HPE FlexNetwork MSR Series User Manual

453
Line management
FXS line configuration
Select Voice Management > Advanced Configuration > Batch Configuration from the
navigation tree, and then click the FXS Line Configuration link in the Line Management area to
access the FXS line configuration page, as shown in Figure 854.
Figure 854
FXS line configura
tion page
Table 304 Configuration items
Item Description
Max Interval for
Dialing the Next
Digit
Specify the maximum interval for the user to dial the next digit.
This timer will restart each time the user dials a digit and will work in this way until all
the digits of the number are dialed. If the timer expires before the dialing is
completed, the user will be prompted to hang up and the call is terminated.
Max Interval
between Off-hook
and Dialing the First
Digit
Specify the maximum interval in seconds between off-hook and dialing the first digit.
Upon the expiration of the timer, the user will be prompted to hang up and the call is
terminated.
Dial Delay Time
Configure dial delay time.
By default, the dial delay time is 1 second.
Input Gain on the
Voice Interface
When the voice signals on the line
attenuate to a relatively great extent,
increases the voice input gain value.
IMPORTANT:
Gain adjustment might lead to call
failures. You are not recommended to
adjust the gain. If necessary, do it with
the guidance of technical personnel.
Output Gain on the
Voice Interface
When a relatively small voice signal
power is needed on the output line,
increases the voice output gain value.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English