HPE FlexNetwork MSR Series User Manual

147
2. Enter the destination IP address or host name.
3. Click Start.
You can see the result in the Summary box.
Figure 532 Traceroute configuration page
Ping operation
The Web interface does not support IPv6 ping.
To perform a ping operation:
1. Select Other > Diagnostic Tools from the navigation tree.
2. Click the Ping tab, as shown in 3.
3. Enter the destination IP addre
ss or host name.
4. Click Start.
You can see the result in the Summary box.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English