HPE FlexNetwork MSR Series User Manual

324
Configuring login control
The login control feature allows you to control Web or Telnet logins by IP address and login type.
Configuration procedure
1. Select Advanced > Access from the navigation tree.
The login control configuration page appears. The upper part of the page allows you to
configure login control rules, and the lower part displays existing login control rules.
You can also delete existing rules.
Figure 338 Login control configuration
2. To add a login control rule, configure the rule as described in Table 150 and click Apply.
3. To delete a login control rule, select the rule from the rule list and click Delete.
Table 150 Configuration items
Item Description
Login Type Select the login type to be restricted, Telnet, Web, or both.
User IP Address Enter an IP address and wildcard to specify the users.
IMPORTANT:
• Exclude the management IP segment from login control. Otherwise, you
cannot log in to the device.
• Do not set the wildcard to 255.255.255.255. Otherwise, no user can log in to
the device.
Wildcard

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English