200
Configuring a static address pool for the DHCP
server
1. Select Advanced > DHCP Setup from the navigation tree.
2. Click the DHCP Interface Setup tab to enter the DHCP interface setup configuration page as
shown in Figure 214.
3. Select the Ser
v
er option in the Type field and expand the Assignable IP Addresses node.
4. Select Static Binding option in the Address Allocation Mode field to expand the static
address pool setup configuration section.
Figure 215 Static address pool setup for the DHCP server
5. Configure the static address pool for the DHCP server as described in Table 106.
6. Click Apply.
To Next Page
Loading...
