37
Cellular interface
Figure 24 Setting Cellular parameters
Table 21 Configuration items
Item Description
WAN Interface
Select the Cellular interface to be configured.
User Name
Specify the user name for identity authentication.
Password
Display whether a password has been specified for identity authentication.
An empty field indicates that no password is configured.
New Password Specify or modify the password for identity authentication.
TCP-MSS Set the maximum TCP segment length of an interface.
MTU Set the MTU of an interface.
Dialer Number Specify a dialer number for an interface.
Online for all time Select an idle timeout value from either of the following:
• Online for all time—The device is always online.
• Online according to the idle timeout value—The device disconnects
from the server if no data exchange occurs between it and the server within
the specified time. After that, it automatically establishes the connection
upon receiving a request for accessing the Internet from the LAN.
When
Online according to the Idle Timeout value
is enabled, specify an idle
timeout value.
Online according to the
Idle Timeout value
Idle Timeout
Setting LAN interface parameters
After finishing the previous configuration, click Next.
To Next Page
Loading...
Need help?
General
