205
Configuring other voice functions
Select Voice Management > Local Number from the navigation tree, and then click the icon of
the local number to be configured to access the call services configuration page as shown in Figure
58
8.
Figure 588
Call services configuration page
Table 214 Configuration items
Item Description
Calling Name
Set the calling name, a string of case-sensitive characters including numbers 0
through 9, letters A through Z or a through z, underlines (_), hyphens (-),dots (.),
exclamation point (!), percent sign (%), asterisk (*), plus sign (+), grave accent (`),
single quotation mark ('), and tilde (~).
By default, no calling name is configured.
The calling name in the calling identity information can only be transmitted in MDMF
format. Therefore, if the calling information delivery is enabled, you must select the
Complex Delivery
option in the
Calling Information Delivery
area.
Calling Information
Delivery
Configure the format of calling information:
• Complex Delivery—Calling identity information is transmitted in complex
format.
• Simple Delivery—Calling identity information is transmitted in simple format.
• Do Not Delivery—Do not deliver the Calling identity information.
By default, the complex delivery is adopted.
If the remote end supports one format only, you must use the same message format
at the local end.
Call Identity
Delivery
• Enable.
• Disable.
The calling identity is delivered by default.
To Next Page
Loading...
Need help?
General
