167
Application control configuration example
Network requirements
As shown in Figure 179, internal users access the Internet through Router. Configure application
control on Router, so that no user can use MSN.
Figure 179 Network diagram
Configuration procedure
# Load the application control file (assume that signature file p2p_default.mtd, which can prevent
using of MSN, is stored on the device).
• Select Security Setup > Application Control from the navigation tree.
• Select the Load Application tab and perform the following configurations, as shown in Figure
18
0.
Figure 180
Loading the application signature file
• Select the From Device option, and select file p2p_default from the list.
• Click Apply. Figure 181 shows the load
ed applications.
To Next Page
Loading...
Need help?
General
