103
Figure 481 Requesting a certificate
3. Configure the parameters as described in Table 192.
Table 192 Configuration items
Item Description
Domain Name
Select the PKI domain for the certificate.
Password
Enter the password for certificate revocation.
Enable Offline
Mode
Select this box to request a certificate in offline mode, that is, by an out-of-band
means like FTP, disk, or email.
If you cannot request a certificate from the CA through the SCEP protocol, you
can enable the offline mode. In this case, after clicking
Apply
, the offline
certificate request information page appears, as shown in
Figure 482
. Submit the
information to the CA to requ
est a local certificate.
4. Click Apply.
If you request the certificate in online mode, the system displays "Certificate
request has been submitted." Click OK to confirm. If you request the certificate in offline mode,
the system displays the offline certificate request information. You can submit the information to
the CA by an out-of-band means.
Figure 482 Offline certificate request information
Retrieving and displaying a CRL
1. From the navigation tree, select Certificate Management > CRL.
To Next Page
Loading...
Need help?
General
