HPE FlexNetwork MSR Series User Manual

215
Figure 598 Configuring hunt group
b. Select Enable for Hunt Group.
c. Click Apply.
Perform the same configuration for the local number 1000 of Telephone A2. The configuration
procedure is not included here.
Verifying the configuration
Dial number 1000 from Telephone B (2000). Because Telephone A1 has a higher priority, Telephone
B is connected to Telephone A1. If you dial number 1000 from Telephone C (3000) when Telephone
A1 and Telephone B are in a conversation, hunt group enables Telephone C to have a conversation
with Telephone A2.
Configuring three-party conference
Network requirements
As shown in Figure 599, place a call from Telephone A to Telephone B and after the call is
established, hold the call on Telephone B. Then, place a call from Telephone B to Telephone C. After
success, press the hook flash on Telephone B and press 3. Then a three-party conference can be
established among Telephones A, B, and C.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English