100
Item Description
Polling Interval
verifies the certificate request in manual mode. During this period, the applicant needs
to query the status of the request periodically to get the certificate as soon as possible
after the certificate is signed.
Enable CRL
Checking
Select this box to specify that CRL checking is required during certificate verification.
CRL Update
Period
Enter the CRL update period, that is, the interval at which the PKI entity downloads the
latest CRLs.
This item is available after you click the
Enable CRL Checking
box.
By default, the CRL update period depends on the next update field in the CRL file.
IMPORTANT:
The manually configured CRL update period takes precedent over that specified in the
CRL file.
CRL URL
Enter the URL of the CRL distribution point. The URL can be an IP address or a
domain name.
This item is available after you click the
Enable CRL Checking
box.
When the URL of the CRL distribution point is not set, you should acquire the CA
certificate and a local certificate, and then acquire a CRL through SCEP.
Generating an RSA key pair
1. From the navigation tree, select Certificate Management > Certificate.
Figure 476 PKI certificates
2. Click Create Key.
Figure 477 Generating an RSA key pair
3. Set the key length.
4. Click Apply.
To Next Page
Loading...
Need help?
General
