HPE FlexNetwork MSR Series User Manual

85
PSK authentication configuration example
Network requirements
As shown in Figure 65, configure the client to access the wireless network by passing PSK
authentication. Configure the same PSK key 12345678 on the client and AP.
Figure 65 Network diagram
Configuration procedure
1. Configure a wireless service:
a. Select Interface Setup > Wireless > Access Service from the navigation tree.
b. Click Add.
Figure 66 Creating a wireless service
a. Set the service name to psk, and select the wireless service type crypto.
b. Click Apply.
2. Configure PSK authentication:
After you create a wireless service, you will enter the wireless service configuration page.
You need to perform security setup when configuring PSK authentication.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English