HPE FlexNetwork MSR Series User Manual

248
Table 124 Configuration items
Item Description
Community Name Set the SNMP community name.
Access Right
Configure SNMP NMS access right:
• Read only—The NMS can perform read-only operations to
the MIB objects when it uses this community name to access
the agent.
• Read and write—The NMS can perform both read and write
operations to the MIB objects when it uses this community
name to access the agent.
View
Specify the view associated with the community to limit the MIB
objects that can be accessed by the NMS.
ACL
Associate the community with a basic ACL to allow or prohibit the
access to the agent from the NMS with the specified source IP
address.
Configuring an SNMP group
Select Advanced > SNMP from the navigation tree, and then click the Group tab to enter the page
as shown in Figure 260.
Figure 260
SNMP group
1. Click Add to enter the Add SNMP Group page.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English