311
Configuring RADIUS
You can configure RADIUS through the Web interface.
Overview
Remote Authentication Dial-In User Service (RADIUS) protocol is a distributed information
interaction protocol that uses a client/server model to implement AAA. It can protect networks
against unauthorized access and is often used in network environments that require both high
security and remote user access.
RADIUS uses UDP port 1812 for authentication and UDP port 1813 for accounting.
RADIUS was originally designed for dial-in user access. With the addition of new access methods,
RADIUS has been extended to support additional access methods, including Ethernet and ADSL.
RADIUS provides access authentication, authorization, and accounting services. The accounting
function collects and records network resource usage information.
For more information about RADIUS and AAA, see HPE FlexNetwork MSR Router Series Comware
5 Security Command Reference.
Configuring a RADIUS scheme
A RADIUS scheme defines a set of parameters that the device uses to exchange information with the
RADIUS servers. There might be authentication servers and accounting servers, or primary servers
and secondary servers. The parameters mainly include the IP addresses of the servers, the shared
keys, and the RADIUS server type. By default, no RADIUS scheme exists.
To configure a RADIUS scheme:
1. Select Advanced > RADIUS from the navigation tree.
Figure 326 RADIUS scheme list
2. Click Add.
To Next Page
Loading...
Need help?
General
