HPE FlexNetwork MSR Series User Manual

299
Step Remarks
2. Configuring MSTP
globally.
Required.
Enable MSTP globally and configure MSTP parameters.
By default, MSTP is disabled globally. All MSTP parameters have default
values.
3. Configuring MSTP on
a port.
Optional.
Enable MSTP on a port and configure MSTP parameters.
By default, MSTP is enabled on a port, and all MSTP parameters adopt the
default values.
Configuring an MST region
1. From the navigation tree, select Advanced > MSTP > Region.
Figure 317 MST region
2. Click Modify.
The MSTP region configuration page appears, as shown in Figure 318.
Figure 318 Modif
ying an MST region

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English