HPE FlexNetwork MSR Series User Manual

325
Login control configuration example
Network requirements
As shown in Figure 339, configure login control rules so Host A cannot Telnet to Router, and Host B
cannot access Router through the Web.
Figure 339 Network diagram
Configuring a login control rule so Host A cannot Telnet to
Router
1. Select Advanced > Access from the navigation tree.
Figure 340 Configuring a login control rule so Host A cannot Telnet to Router
2. Select Telnet as the login type to be restricted.
3. Enter the user IP address 10.0.0.1.
4. Enter the wildcard 0.0.0.0.
5. Click Apply.
A dialog box appears, asking you whether you want to continue your operation.
6. Click OK.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English