39
Setting WLAN interface parameters
After finishing the previous configuration, click Next.
Figure 26 Setting WLAN parameters
Table 23 Configuration items
Item Description
WLAN Setting
Select whether to make WLAN settings.
Network Name
(SSID)
Specify a wireless network name.
Network Hide
Select whether to hide the network name.
Radio Unit
Select a radio unit supported by the AP, which can be 1 or 2.
Which value is supported varies with device models.
Enable Encrypt
Select whether to enable data encryption.
With data encryption enabled, data transmission between wireless client and wireless
device can be secured.
Encrypt Act
Select an encryption mode for the wireless network, WEP40 or WEP104.
Key Mode
Select a key format.
• When you select WEP40, the key can be a 5-character string or 10-digit
hexadecimal number.
• When you select WEP104, the key can be a 13-character string or a 26-digit
hexadecimal number.
Key Seed
You can either use a key seed to generate keys or enter keys manually. Then, you can
To Next Page
Loading...
Need help?
General
