HPE FlexNetwork MSR Series User Manual

358
Item Description
Voice Output Gain
Set the value of the audio input gain, in the range of –24.0 to +12.0 with a step of
1. When a relatively small voice signal power is needed on the output line,
increase the voice output gain value.
IMPORTANT:
Gain adjustment might lead to call failures. Hewlett Packard Enterprise
recommends not adjusting the gain. If necessary, do it with the guidance of
technical personnel.
Configuring an MoH line
Select Voice Management > Line Management from the navigation tree, and then click the
icon of the paging line to be configured to access the MoH interface configuration page, as shown
in Figure 738.
Figure 738
Con
figuring SIC-audio MoH interface
Table 277 Configuration items
Item Description
Line Description Specify the description of the MoH line.
Voice Interface Output
Gain
When a relatively small voice signal power is needed on the output line, increase
the voice output gain value.
IMPORTANT:
Gain adjustment might lead to call failures. Hewlett Packard Enterprise
recommends not adjusting the gain. If necessary, do it with the guidance of
technical personnel.
Silent Mode
• Enable.
• Disable.
By default, the silent mode is disabled.
IMPORTANT:
If the silent mode is enabled on an audio interface, the interface cannot transmit
data.
Voice Output Gain
Set the value of the audio input gain, in the range of –19.5 to +41.5 with a step of
2. When a relatively small voice signal power is needed on the output line,
increase the voice output gain value.
IMPORTANT:
Gain adjustment might lead to call failures. Hewlett Packard Enterprise
recommends not adjusting the gain. If necessary, do it with the guidance of
technical personnel.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English