HPE FlexNetwork MSR Series User Manual

106
Table 61 Configuration items
Item Description
802.11a
Configure rates (in Mbps) for 802.11a.
By default:
• Mandatory rates—6, 12, and 24.
• Supported rates—9, 18, 36, 48, and 54.
• Multicast rate—Automatically selected from the mandatory rates. The
transmission rate of multicasts in a BSS is selected from the mandatory
rates supported by all the clients.
802.11b
Configure rates (in Mbps) for 802.11b.
By default:
• Mandatory rates—1 and 2.
• Supported rates—5.5 and 11.
• Multicast rate—Automatically selected from the mandatory rates. The
transmission rate of multicasts in a BSS is selected from the mandatory
rates supported by all the clients.
802.11g
Configure rates (in Mbps) for 802.11g.
By default:
• Mandatory rates—1, 2, 5.5, and 11.
• Supported rates—6, 9, 12, 18, 24, 36, 48, and 54.
• Multicast rate—Automatically selected from the mandatory rates. The
transmission rate of multicasts in a BSS is selected from the mandatory
rates supported by all the clients.
Configuring 802.11n MCS
Configuration of mandatory and supported 802.11n rates is achieved by specifying the maximum
Modulation and Coding Scheme (MCS) index.
Select Interface Setup > Wireless > Radio from the navigation tree, and click the Rate tab
Figure 105 Setting 802.11n rate
Table 62 Configuration items
Item Description
Mandatory Maximum MCS
Set the maximum MCS index for 802.11n mandatory rates.
IMPORTANT:
If you select the client dot11n-only option, you must configure the
mandatory maximum MCS.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English