EasyManuals Logo
Home>HPE>Network Router>FlexNetwork MSR Series

HPE FlexNetwork MSR Series User Manual

HPE FlexNetwork MSR Series
861 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #560 background imageLoading...
Page #560 background image
206
Item Description
Incoming Call
Barring
Enable.
Disable.
By default, incoming call barring is disabled.
Password for
Outgoing Call
Barring
Set a password to lock your telephone when you do not want others to use your
telephone.
Door Open Service
Door Opening
Password.
Enable the door opening control service and set a password for
opening the door and the door open duration before the door control
relay locks the door.
By default, the door opening service is disabled.
IMPORTANT:
Install a SIC audio card on the device on which the door
opening control enabled FXS voice subscriber line resides.
When the door opening control service enabled, the
out-of-band DTMF transmission is disabled. No matter the line
is a calling or called line, the out-of-band DTMF transmission
loses effect.
Door Open
Duration.
Feature Service
Enable.
Disable.
By default, feature service is disabled.
Hunt Group
Enable.
Disable.
By default, the hunt group function is disabled.
IMPORTANT:
To use the hunt group feature, you need to select the Enable option of all local
numbers involved in this service.
Message Waiting
Indicator
Enable.
Disable.
By default, MWI is disabled.
After MWI is enabled, you can configure the Duration of Playing the Message Waiting
Tone parameter according to your needs.
IMPORTANT:
Generally, the voice gateway sends a SUBSCRIBE to the server, and receives a
NOTIFY from the server if the subscription is successful, and gets the status of the
voice mailbox afterwards.
Hotline Numbers
Configure the private line auto ring-down (PLAR) function. The number is the E.164
telephone number of the terminating end.
On-hook Delay
Time of the Called
Party
Enable calling party control and set the on-hook delay time of the called party. If the
delay time is set to 0, this indicates that the call party control is disabled.
By default, calling party control is disabled, that is, the on-hook delay of the called
party is set to 0.
Processing Priority
When the Line is
Busy
Specify the processing sequence of services when the line is busy.

Table of Contents

Other manuals for HPE FlexNetwork MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork MSR Series and is the answer not in the manual?

HPE FlexNetwork MSR Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork MSR Series
CategoryNetwork Router
LanguageEnglish

Related product manuals