36
CT1/PR1 interface
Figure 23 Setting CT1/PR1 parameters
Table 20 Configuration items
Item Description
WAN Interface
Select the CT1/PR1 interface to be configured.
Work Mode: E1
Select the CT1 work mode.
Operation
Select one of the following operation actions:
• Create—Binds timeslots.
• Remove—Unbind timeslots.
Serial
Select the number for the created serial interface.
Timeslot-List
Specify the timeslots to be bound or unbound.
User Name
Specify the user name for identity authentication.
Password
Display whether a password has been specified for identity authentication.
An empty field indicates that no password is configured.
New Password Specify or modify the password for identity authentication.
TCP-MSS Set the maximum TCP segment length of an interface.
MTU Set the MTU of an interface.
To Next Page
Loading...
Need help?
General
