209
Figure 222 DHCP address pool 0 configuration
6. Configure DHCP address pool 1 (including the address range, lease duration, and gateway
address):
a. Enter poo1 in the Pool Name field, as shown in Figure 223.
b. Selec
t
Dynamic Allocation in the Address Allocation Mode field.
c. Enter 10.1.1.0 in the IP Address field.
d. Select the Subnet Mask box, and then enter 255.255.255.128.
e. Set the Lease Duration to 10 days, 12 hours, and 0 minutes.
f. Select the Gateway IP Address box, and then enter 10.1.1.126.
g. Click Apply.
To Next Page
Loading...
