47
Figure 31 Configuring an ADSL/G.SHDSL interface
Table 28 Configuration items (IPoA)
Item Description
WAN Interface Displays the name of the ADSL/G.SHDSL interface to be configured.
Interface Status
Display and set the interface status:
• Connected—Indicating that the current interface is up and connected,
click Disable to shut down the interface.
• Not connected—Indicating that the current interface is up but not
connected, click Disable to shut down the interface.
• Administratively Down—Indicating that the current interface is shut
down by a network administrator, click Enable to bring up the interface.
Connect Mode: IPoA Select IPoA as the connection mode.
PVC Set the VPI/VCI value for the PVC.
TCP-MSS Configure the TCP MSS on the interface.
MTU Configure the MTU on the interface.
IP Address Configure the IP address for the interface.
IP Mask Configure the subnet mask for the interface.
Map IP Set the remote IP address for the IPoA mapping.
Table 29 Configuration items (IPoEoA)
Item Description
WAN Interface Displays the name of the ADSL/G.SHDSL interface to be configured.
To Next Page
Loading...
Need help?
General
