HPE FlexNetwork MSR Series

385
Figure 779 Configuring alone mode
2. Select Enable for Server Running State.
3. Enter 2.1.1.2 in IP Address Bound to the Server.
4. Select Alone for Server Operation Mode.
5. Click Apply.
# Configure a call-out route
6. Select Voice Management > SIP Local Survival > Call-Out Route from the navigation tree,
and click Add to access the following page.
Figure 780 Configuring a call-out route
7. Enter 0 for ID.
8. Enter 55665000 for Destination Number Prefix, and 8 for Number Length.
9. Enter 2.1.1.1 for Destination IP Address.
10. Enter 8899 for Area Prefix.
11. Click Apply.
# Configure user 1000.
12. Select Voice Management > SIP Local Survival > User Management from the navigation
tree, and click Add to access the following page.