Color Change and Thermal Sensitive Resin Example 231
User Guide v 2.0 — March 2023 Color Change
17. Continue to do short injection shots with the Ultra Purge (Figure 13-31).
NOTE: This helps flush the Ultra Purge and bring the new color resin to the hot runners.
18. Do four to five injection shots with the new production resin to complete the purge
(Figure 13-32).
NOTE: This makes sure that the new production resin flows through the hot runners.
19. Touch the green check mark button when you have completed the injection shots.
Figure 13-31 Continue to Do Short Injection Shots with Ultra Purge
Figure 13-32 Do Four to Five Injection Shots with the New Production Resin
To Next Page
Loading...
