KAESER SIGMA CONTROL 2 User Manual

5. Press «Enter».
The «IDLE» key is deactivated.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
5.2.3 Load control
Menu
Logic : +
loc.-load RC DI1.07 ☑
Logic : +
·········
Key remote: ☐
Key idle: ☐
Active line with deactivated check box
6. Press «Escape» repeatedly to return to the main menu.
Result It is ensured that unauthorized users can press the «IDLE» key without the machine switching to
IDLE.
8.5 Configuring machine start and stop
➤ In addition to manually starting the machine locally, you have the following alternatives:
Function State on delivery, setting See
Automatic start/stop in timer mode No clock (time) program set 8.5.1
Holidays Not set 8.5.2
Remote start, e.g. from a control center Deactivated 8.5.3
"Venting" function Activated 8.5.5
"Autostart" function Activated 8.5.6
Tab. 59 Configuring machine start and stop
8.5.1 Automatic start/stop in Timer mode
Overview
■ Open the Compressor clock menu
■ Setting/adjusting the time program
■ Activating the «Timer» key
■ Activating timer control
8.5.1.1 Compressor clock
Precondition Password access level 2 is activated.
8 Initial Start-up
8.5 Configuring machine start and stop
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
91

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet