KAESER SIGMA CONTROL 2 User Manual

3. Press «Up».
The check box is activated.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
5.11 Save data
Menu
Language: en_US English
·········
Save data : ☑
·········
Eject SD card : ☑
Active line
Status recognised
4. Press the «Enter» key.
A security query is displayed.
5. Press «Enter».
Result The SD card is securely logged off from the electronic control and can be removed without the risk
of data loss.
9.15.1 Format SD card
Precondition The operating mode is displayed.
The machine has been switched off with the «OFF» key.
The EMERGENCY STOP push button has been actuated.
1. Open the 5.11 <Configuration – Save data> menu.
2. Use «Up» or «Down» to select the Format SD card line.
3. Press «Enter».
The check box Format SD card will flash.
4. Press «Up».
The check box is activated.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
5.11 Save data
Menu
Save data : ☑
·········
Eject SD card : ☐
Status recognised
·········
Format SD card : ☑
Active line
5. Press the «Enter» key.
A security query is displayed.
6. Press «Enter».
SD card being formatted.
9 Operation
9.15 Save data
196
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2 No.: 9_9450 13 USE

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet