KAESER SIGMA CONTROL 2 User Manual

12 Spares, Operating Materials, Service
12.1 Note the nameplate
The nameplate contains all information to identify your machine. This information is essential to us
in order to provide you with optimal service.
➤ Please give the information from the nameplate with every inquiry and order for spare parts.
12.2 Service Addresses
Addresses of KAESER representatives are given at the end of this manual.
12.3 Displaying the version number, machine model, part number and
serial number
1. Open the 5.1.1 <Configuration – General – System information> menu.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
5.1.1 System information
Menu
▶1 SIGMA CONTROL 2 MCS
Active line
▶2 Compressor
▶3 I/O modules
▶4 FC information
Applies to FLUID only
2. Press «Enter».
The system information is displayed.
8 8 p s i 0 8 : 1 5 A M 1 7 6 ° F
Header
5.1.1.1 SIGMA CONTROL 2 MCS
Menu
Software fluid_5.1.2
Software version
·········
KAESER
PN 7.7601.0
Part number
SN 123456
Serial number
·········
12 Spares, Operating Materials, Service
12.1 Note the nameplate
No.: 9_9450 13 USE
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.1.2
233

KAESER SIGMA CONTROL 2 Specifications

General

Controller Type	Microprocessor-based
Model	SIGMA CONTROL 2
Manufacturer	KAESER
Input Voltage	24 V DC
Protection Class	IP54
Communication Protocols	Modbus, Profibus
Data Logging	Comprehensive data logging
Remote Monitoring	Yes
Communication Interface	Ethernet